GOLOHO POLYMER (CHANGZHOU) CO.,LTD.
banderolli

Light/Moisture Cure Conformal Coating-L213

Features of GOLOHO-L213

UV rapid cure
secondary moisture cure
one-component, 100% solid content
low viscosity
-55℃~120℃ temperature resistance: -55~120℃
  • Description
GOLOHO-L213 is a single component, UV-moisture curable, acrylated polyurethane conformal coating

Typical applications of GOLOHO-L213

Coating and protection on the complex shape of PCB and integrated circuit

Typical properties of GOLOHO-L213

Model

L213

Appearance

colorless/light-yellow liquid

Resin

acrylated polyurethane

Solid content       %

100

Density        g/cm3

1.09

Viscosity        cP

100

Cure time     s

10

Illumination intensity    mJ/cm2

500~600

Temperature resistance       ℃

-55~120

Dielectric strength      kV/mm

43

Volume Resistivity    Ω·cm

6.3×1011

Dielectric constant      1MHz

4.01

Dielectric dissipation factor    1MHz

0.12


How to use GOLOHO-L213

  • As it is sensitive to light, these kinds of light like sunlight, UV, artificial light must be controlled to decrease its exposure during storage and handing process.
  • All surface in contact with the material should be clean and free from impurity, grease, or other contaminants prior to dispensing the material to acquire expectant results
  • Application methods: artificial brush, mechanic spray, dip
  • Cure: proper length wave UV light is needed to achieve constant depth of cure, and the cure time depend on the lamp intensity and distance from the source
  • Some temperature sensitive substrate should be cooled before coating.

Special version of GOLOHO-L213

The product is nontoxic after curing, but avoid contact with skin. If contact the compound with eyes, rinse immediately with plenty of water
Shelf life and storage conditions
Shelf life: in sealed original containers 12 months at 5~25℃
Storage: protect from UV light, protect against humidity

For users

  • Without notice, the contents of this article may be changed due to the product performance improvement and specification.
  • We just only ensure the specifications of our products. You have to test the product before using to conform if it is suitable for your use.
  • Our products are developed for general industrial use.
  • The data are real expression in the existing test methods and results of GOLOHO POLYMER in this paper. However, because of the uniqueness of every application, the product information can never replace necessary testing before user's applying. The user's test results are the only way to ensure the product is suitable for their specific application requirements. Therefore, unless a written guarantee, GOLOHO POLYMER only ensures the products comply with the factory specifications. GOLOHO POLYMER never recognizes any other form of guarantee and claim clause. GOLOHO POLYMER has the right to test again for product quality if there is any quality problem. GOLOHO POLYMER will provide replacement or refund if any quality problem confirm. Users should be responsible for ensuring that their applications comply with local safety regulations and obtain the necessary certifications and recognition. GOLOHO POLYMER does not undertake any responsibility for any safety and loss problems.
  • Please contact the company's customer service if you want to reprint the contents of the products. Customer service hotline: 0519-85610389; for more details, please visit web site:goloho@sina.com

Leave a Message Email Us

we will contact you within 24 hours.

Related Products
  • Two-Part, 1 To 1 Mix Ratio Transparent Silicone Gel - 324C-AB

    Two-Part, 1 To 1 Mix Ratio Transparent Silicone Gel - 324C-AB

    November 30, 2017GOLOHO-324C is a two-part, addition curing silicone gelApplications of GOLOHO-324C-ABSuitable for sealing and protecting various high purity electronic devicesEspecially protection of sophisticated an...view
  • Light Cure Conformal Coating - L226

    Light Cure Conformal Coating - L226

    November 30, 2017GOLOHO-L226 is a single component, UV curable, acrylated modified conformal coatingFeatures of GOLOHO-L215UV rapid cureone-component, 100% solid contentlow viscosityemperature resistance: -55~120℃Typ...view
  • Thermally Conductive Silicone Compound - 667

    Thermally Conductive Silicone Compound - 667

    November 30, 2017GOLOHO-666 is the pasty,high-efficient thermally conductive compound,filled in the room between the electronic components and the heatsinks, such as between modern high-power CPUs and high performance heatsin...view
  • Modified Alkyd Conformal Coating - L220

    Modified Alkyd Conformal Coating - L220

    November 30, 2017GOLOHO-L220 is part of the range of transparent coating varnishes based on established modified alkyd chemistry. It is modified to be ideal for air driven spray applications without nozzle blocking. T...view
  • High Thermally Conductive Silicone Adhesive - 4337

    High Thermally Conductive Silicone Adhesive - 4337

    November 30, 2017GOLOHO-4337 is a one-part ,low viscosity allows for excellent flowability and non-corrosive to metal , heat curable silicone rubber designed for electric and electronic parts required high speed cured...view