GOLOHO POLYMER (CHANGZHOU) CO.,LTD.
banderolli

Waterproof Glue

Characteristics 


High flexibility, waterproof and moisture proof, strong adhesive force, strong resistance to cracking, permeable to air but impermeable to water, easy and high efficiency operation, excellent anti-permeability, etc.

Scope of Application


1. Suitable for the waterproofing and anti-permeability of buildings with concrete and mortar masonry structures.

2. Especially suitable for the waterproofing of basement, bathroom floor and wall, kitchen, balcony and other absorptive surfaces.

3. Suitable for the waterproofing of buildings with all kinds of concrete and masonry structures.

4. Suitable for kitchen, toilet, balcony, basement and other building parts.

5. Suitable for floor waterproofing project of floor heating system.

Classification


PS glue, PC glue, PA glue, PP glue, PE glue, rubber glue, polyurethane glue.

Usage


1.After the surface of the concrete is directly coated with a layer of waterproof sealant (adhesive layer thickness 2-3mm), all kinds of decorative materials can be bonded to the surface, both waterproofing and bonding can be achieved in one step. The operation intensity can be reached after 7 days.

2.The adhesive can also be used for sealing and caulking. It has good adhesion to concrete, plasterboard, tile, brick, marble, wood, etc. It can be widely used in sealing, caulking and waterproofing of building materials.

3.Waterproofing of toilet. Directly coating the concrete with 1-2 layers of waterproof sealant (film thickness 2-3mm) to achieve waterproof effect (more than 7 days).

4. The combination of this glue and Bihu polymer cement glue can be used for roof waterproofing.

Matters Needing Attention


1. The surface of the bonding material should be clean, dry, smooth and firm. Do not soak the bonding material before the bonding.

2. Pointing with cement after the ceramic tile and mosaic having been bonded with concrete for 24 hours.

3. The glue is not suitable for bonding building materials with oil and film removal agents.

4. The construction temperature should be above 0 ℃.

5. It should be kept in an environment above 0 ℃. It is valid for one year.

6. Avoid direct contact with the skin for a long time. If the glue is splashed into the eyes inadvertently, please find a doctor for diagnosis and treatment.

If you are interested in best waterproof silicone sealant, come to Goloho, the professional silicone gel manufacturers.
Related News
  • Tips For Silicone Sealant

    Tips For Silicone Sealant

    October 17, 2018(1) Silicone sealant for construction is widely accepted as the waterproof sealing material widely used in interior and exterior decoration of various buildings. However, with the rapid development of...view
  • Best Way To Apply Silicone Sealant

    Best Way To Apply Silicone Sealant

    October 17, 2018(1) The silicone sealant has stable quality and long-lasting effect, unlike the acrylic system. As a result, they are extremely cost-effective, especially when used in kitchens and bathrooms. Silicone...view
  • Waterproof Adhesive

    Waterproof Adhesive

    May 22, 2018Characteristics: High flexibility, waterproof and moisture proof, strong adhesive force, strong resistance to cracking, permeable to air but impermeable to water, easy and high efficiency operation, e...view
  • What Does Silicone Mean

    What Does Silicone Mean

    October 17, 2018(1) Silicon is a very rich element on the earth, and silicone is the product after the organic silicon is organized. Silicone, also known as silicone or siloxane, is a siloxane organic polymer that is...view
  • Solvent For Silicone

    Solvent For Silicone

    August 16, 2018Silica gel alias: Silicic acid gel. It is a highly active adsorbent material and an amorphous material. Its chemical formula is mSiO2. nH2O. It is insoluble in water and any solvent, non-toxic, odorle...view
  • Thermal Conduction Mechanism of Silicone Rubber

    Thermal Conduction Mechanism of Silicone Rubber

    November 11, 2020The traditional method to solve the heat dissipation of electronic equipment is to pad a layer of insulating medium between the heating element and the heat sink as a thermal conductive material, such...view