GOLOHO POLYMER (CHANGZHOU) CO.,LTD.
banderolli

Waterproof Adhesive

Characteristics: High flexibility, waterproof and moisture proof, strong adhesive force, strong resistance to cracking, permeable to air but impermeable to water, easy and high efficiency operation, excellent anti-permeability, etc.

Scope of Application

1. Suitable for the waterproofing and anti-permeability of buildings with concrete and mortar masonry structures.

2. Especially suitable for the waterproofing of basement, bathroom floor and wall, kitchen, balcony and other absorptive surfaces.

3. Suitable for the waterproofing of buildings with all kinds of concrete and masonry structures.

4. Suitable for kitchen, toilet, balcony, basement and other building parts.

5. Suitable for floor waterproofing project of floor heating system.

Classification

PS glue, PC glue, PA glue, PP glue, PE glue, rubber glue, polyurethane glue.

Usage

1. After the surface of the concrete is directly coated with a layer of waterproof sealant (adhesive layer thickness 2-3mm), all kinds of decorative materials can be bonded to the surface, both waterproofing and bonding can be achieved in one step. The operation intensity can be reached after 7 days.

2. The adhesive can also be used for sealing and caulking. It has good adhesion to concrete, plasterboard, tile, brick, marble, wood, etc. It can be widely used in sealing, caulking and waterproofing of building materials.

3. Waterproofing of toilet. Directly coating the concrete with 1-2 layers of waterproof sealant (film thickness 2-3mm) to achieve waterproof effect (more than 7 days).

4. The combination of this glue and Bihu polymer cement glue can be used for roof waterproofing.

Matters Needing Attention

1. The surface of the bonding material should be clean, dry, smooth and firm. Do not soak the bonding material before the bonding.

2. Pointing with cement after the ceramic tile and mosaic having been bonded with concrete for 24 hours.

3. The glue is not suitable for bonding building materials with oil and film removal agents.

4. The construction temperature should be above 0 ℃.

5. It should be kept in an environment above 0 ℃. It is valid for one year.

6. Avoid direct contact with the skin for a long time. If the glue is splashed into the eyes inadvertently, please find a doctor for diagnosis and treatment.

Professional Silicone Product Manufacturer & Supplier - GOLOHO POLYMER

Related News
  • The Eighth Shenzhen Thousands Of People Power Technology Seminar

    The Eighth Shenzhen Thousands Of People Power Technology Seminar

    December 19, 2017Tianyongcheng invites you to join "the eighth Shenzhen thousands of people's power technology semina." "The news is so exhilarating that everyone is celebrating and spreading it to the rest of the wor...view
  • CSEPV 2017 China (Shenzhen) International Solar Photovoltaic Exhibition

    CSEPV 2017 China (Shenzhen) International Solar Photovoltaic Exhibition

    December 19, 2017CSEPV 2017 China (Shenzhen) International Solar Photovoltaic Exhibition will be held in Shenzhen International Exhibition Center from December 8th to December 10th. Through the concentrated display an...view
  • What Is The Best Silicone Sealant

    What Is The Best Silicone Sealant

    October 17, 2018(1) Neutral curing silicone rubber, which has good bonding strength and sealing performance for most materials, and has good high and low temperature resistance. The temperature ranges from -45 °C to...view
  • Tips For Silicone Sealant

    Tips For Silicone Sealant

    October 17, 2018(1) Silicone sealant for construction is widely accepted as the waterproof sealing material widely used in interior and exterior decoration of various buildings. However, with the rapid development of...view
  • Preparation And Application Of Silicone Solvent

    Preparation And Application Of Silicone Solvent

    August 16, 2018The silicone solvent is a milky white or light cyan transparent solution, and the basic component is amorphous silica. Its molecular formula is mSiO2•nH2O, wherein SiO2 is dispersed in water or an or...view
  • Vulcanization of RTV one

    Vulcanization of RTV one

    July 29, 2019The vulcanization reaction of RTV one is initiated by moisture in the air. The commonly used cross-linking agent is methyl triacetoxysilane, whose Si-O-C bond is easily hydrolyzed. Acetoxy and hydroge...view