GOLOHO POLYMER (CHANGZHOU) CO.,LTD.
banderolli

Proper Use of Adhesives

Process of bonding technology: surface preparation for different properties of the bonded matter and different conditions. Strictly it can be divided into general methods, chemical methods and physical methods. In the decoration industry, we mainly deal with the sticky objects simply, such as disposal of dust, oil, rough surface, moisture and so on to ensure a clean, dry and oil-free sticky surface.

The glued surface should be evenly coated to ensure infiltration. Avoid bubbles as much as possible. Bubbles reduce the bonding strength, resulting in degumming. Attention should be paid to the position without dislocation, which can not be wrongly moved, and the air should be removed by pressurizing to keep it in close contact.

Curing adhesives make the glue layer become solid through chemical and physical actions. Curing is the last step to obtain adhesive properties, which has great influence on the bonding strength. In the curing process, temperature, pressure and time are the 3 key factors in curing process. Change of each parameter affects directly the bonding strength (Each adhesive has a specific curing temperature and time.). Putting a certain pressure on the curing is necessary for all adhesives(especially silicone adhesive) because pressurization is beneficial to the diffusion and penetration of the adhesive and close contact with the adhesive. And it helps to exhaust gas and water and to avoid the formation of bubbles and pores so as to make the glue layer even and the location of the stick fixed. Whether by chemical reaction or physical action to complete the glue layer curing, it takes certain time. In order to solidify completely to achieve the maximum bonding strength, we must ensure sufficient curing time, (This usually means it needs a certain amount of time to make the adhesive to achieve the ultimate adhesion).

Related News
  • Alumni From Nanjing University Of Aeronautics And Astronautics Visit Tianyongcheng

    Alumni From Nanjing University Of Aeronautics And Astronautics Visit Tianyongcheng

    December 19, 2017On November 25th, 2016, Shenzhen, Hong Kong and Macao alumni from Nanjing University of Aeronautics and Astronautics visited Tianyongcheng polymer materials (Changzhou) Co., Ltd. And they provided gui...view
  • The Use of Liquid Addition Silicone Rubber RTV-2

    The Use of Liquid Addition Silicone Rubber RTV-2

    May 25, 20181. Selection and mixing of varietiesThe condensation type 2 part silicone adhesive rubber compound can be made to easy to flow low viscosity products according to the needs and even to nonmobile thixo...view
  • Uses Of Waterproof Adhesive

    Uses Of Waterproof Adhesive

    August 16, 2018Uses of waterproof adhesive:1.Concrete surface: apply directly on the concrete surface, with thickness between 2mm and 3mm, not too thin or too thick. Dry for more than 7 days after construction.2.Sea...view
  • 10 Common Adhesive Properties of Adhesive

    10 Common Adhesive Properties of Adhesive

    May 25, 20181. Instant adhesion. Instant adhesive is not required to be heated and pressurized. It has the characteristics of fast curing and strong bonding strength. The pull of a 6.45 square centimeter adhesive...view
  • Distinction And Application Of Waterproof Agent And Waterproof Adhesive

    Distinction And Application Of Waterproof Agent And Waterproof Adhesive

    August 16, 2018Waterproof adhesive: it is mainly for binding and waterproof. Adhesion requirements are relatively high, such as the binding of board and corrugated paper.Waterproof properties:High flexibility, moist...view
  • Waterproof Adhesive

    Waterproof Adhesive

    May 22, 2018Characteristics: High flexibility, waterproof and moisture proof, strong adhesive force, strong resistance to cracking, permeable to air but impermeable to water, easy and high efficiency operation, e...view