GOLOHO POLYMER (CHANGZHOU) CO.,LTD.
banderolli

10 Common Adhesive Properties of Adhesive

10 Common Adhesive Properties of Adhesive

1. Instant adhesion. Instant adhesive is not required to be heated and pressurized. It has the characteristics of fast curing and strong bonding strength. The pull of a 6.45 square centimeter adhesive is enough to lift a car. Such adhesion has a great effect on the continuous production line.

2. Adhesion of structural parts. Structural parts adhesion refers to the adhesion of structures, such as buildings, vehicles, ships, aircraft, spacecraft, and other structures, which can withstand a prolonged period of load and stresses. According to different uses, it should also have various special properties, like automotive silicone adhesive. For example, the adhesive for making aircraft can reduce the structural quality of the aircraft and increase speed. It also makes the surface smooth, which is favorable for navigation. It also has the sealing, anti-corrosion and other properties.

3. Liquid sealing leakage. Some adhesives are liquid at normal temperature, which are applied to various connections or areas that need to be sealed, forming a flexible rubber layer that can replace the usual gasket and seal.

4. Underwater adhesion. In the construction of dams or Bridges, in shipbuilding, in the defense industry, it can connect the prefabricated parts on land to the parts under water, thus greatly simplifying the constructive process and speeding up the construction progress.

5. Oil surface adhesion. The oil surface do not need to remove oil, which simplifies the process, and has good adhesion strength.

6. Hot melt adhesion. Hot melt adhesive is a kind of solid. It can be glued when it is heated and melted into fluid. After the bonding, it is cooled to solid to form solid adhesive. Hot-melt adhesives are made up of thermoplastic polymers with tackifier and so on.

7. High-temperature resistance adhesion and ultra-low temperature bonding. The general high performance silicone can withstand the temperature below 100 ℃. The inorganic adhesive is able to endure about 600 ℃, and the ceramic adhesive is the best, and it can resist higher temperature at 1300 ℃. The super low temperature adhesive can maintain high strength and toughness at -196 ℃, or even lower temperature at -269 ℃.

8. Pressure sensitive adhesive. This product is used for the adhesion of commodity labels, the sealing of cartons, the binding of wire bundles and the protection of the surface of high-gloss metal plates.

9. Medical adhesion. Medical adhesive has become an indispensable new material for medical treatment. For example, the adhesion of the kidney, the anastomosis of blood vessels, the anastomosis of the wound, the esophagus or biliary tract, the adhesion and repair of the dental, the bone connection, it can play a very good role.

10. In addition, there is also conductive adhesive for electronic device leads, and conductive adhesive with silver powder as conductor. It is used in high-transparency optical glass glue and photosensitive curing adhesive and electron beam curing adhesive for optical glass bonding.

Related News
  • How To Use Sealing Silicone

    How To Use Sealing Silicone

    May 22, 2018Sealing silicone is hy-211 two-component room temperature vulcanized silicone rubber, with low viscosity, easy mixing and easy infusion. It is suitable for large volume sealing and excellent electrica...view
  • Tips For Silicone Sealant

    Tips For Silicone Sealant

    October 17, 2018(1) Silicone sealant for construction is widely accepted as the waterproof sealing material widely used in interior and exterior decoration of various buildings. However, with the rapid development of...view
  • Coating Adhesive

    Coating Adhesive

    May 25, 2018Coating adhesive, also known as cladding adhesive, rtv silicone coating or coating for commonness, is a kind of coating-type adhesive with special formulation. After applying the coating adhesive on t...view
  • The Use of Liquid Addition Silicone Rubber RTV-2

    The Use of Liquid Addition Silicone Rubber RTV-2

    May 25, 20181. Selection and mixing of varietiesThe condensation type 2 part silicone adhesive rubber compound can be made to easy to flow low viscosity products according to the needs and even to nonmobile thixo...view
  • Distinction And Application Of Waterproof Agent And Waterproof Adhesive

    Distinction And Application Of Waterproof Agent And Waterproof Adhesive

    August 16, 2018Waterproof adhesive: it is mainly for binding and waterproof. Adhesion requirements are relatively high, such as the binding of board and corrugated paper.Waterproof properties:High flexibility, moist...view
  • How To Use Quick-drying Silicone Sealant

    How To Use Quick-drying Silicone Sealant

    May 22, 20181.Use: A single group of silicone glass glue can be used immediately. It is easy to type it from the bottle with a glue gun, and a spatula or wood chip can be used to trim the surface.2.Adhesion time:...view