GOLOHO POLYMER (CHANGZHOU) CO.,LTD.
banner

Light Cure Conformal Coating - L226

Features of GOLOHO-L226

UV rapid cure
one-component, 100% solid content
low viscosity
emperature resistance: -55~120℃
  • Description
GOLOHO-L226 is a single component, UV curable, acrylated modified conformal coating

Typical applications of GOLOHO-L226

Coating and protection on the complex shape of PCB and integrated circuit

Model

L226

Appearance

light-yellow transparent liquid

Resin

acrylated modified

Solid content          %

100

Density           g/cm3

1.09 ± 0.05

Viscosity           cP@25℃

200 ~ 400

Cure time        s

15 ± 5

Illumination intensity       mJ/cm2

800~1000

Temperature resistance       ℃

-55~120

Dielectric strength       kV/mm

43

Volume Resistivity     Ω·cm

6.3×1011

Dielectric constant       1MHz

4.01

Dielectric dissipation factor    1MHz

0.12


How to use GOLOHO-L226

  • As it is sensitive to light, these kinds of light like sunlight, UV, artificial light must be controlled to decrease its exposure during storage and handing process.
  • All surface in contact with the material should be clean and free from impurity, grease, or other contaminants prior to dispensing the material to acquire expectant results
  • Application methods: artificial brush, mechanic spray, dip
  • Cure: proper length wave UV light is needed to achieve constant depth of cure, and the cure time depend on the lamp intensity and distance from the source
  • Some temperature sensitive substrate should be cooled before coating.

Special version of GOLOHO-L226

The product is nontoxic after curing, but avoid contact with skin. If contact the compound with eyes, rinse immediately with plenty of water

Shelf life and storage conditions of GOLOHO-L226

Shelf life: in sealed original containers 12 months at 5~25℃
Storage: protect from UV light, protect against humidity

For users

  • Without notice, the contents of this article may be changed due to the product performance improvement and specification.
  • We just only ensure the specifications of our products. You have to test the product before using to conform if it is suitable for your use.
  • Our products are developed for general industrial use.
  • The data are real expression in the existing test methods and results of GOLOHO POLYMER in this paper. However, because of the uniqueness of every application, the product information can never replace necessary testing before user's applying. The user's test results are the only way to ensure the product is suitable for their specific application requirements. Therefore, unless a written guarantee, GOLOHO POLYMER only ensures the products comply with the factory specifications. GOLOHO POLYMER never recognizes any other form of guarantee and claim clause. GOLOHO POLYMER has the right to test again for product quality if there is any quality problem. GOLOHO POLYMER will provide replacement or refund if any quality problem confirm. Users should be responsible for ensuring that their applications comply with local safety regulations and obtain the necessary certifications and recognition. GOLOHO POLYMER does not undertake any responsibility for any safety and loss problems.
  • Please contact the company's customer service if you want to reprint the contents of the products. Customer service hotline: 0519-85610389; for more details, please visit web site: goloho@sina.com

Leave a Message Email Us

we will contact you within 24 hours.

Related Products
  • Thermally Conductive Silicone Compound - 667

    Thermally Conductive Silicone Compound - 667

    November 30, 2017GOLOHO-666 is the pasty,high-efficient thermally conductive compound,filled in the room between the electronic components and the heatsinks, such as between modern high-power CPUs and high performance heatsin...view
  • Light/Moisture Cure Conformal Coating-L213

    Light/Moisture Cure Conformal Coating-L213

    November 30, 2017GOLOHO-L213 is a single component, UV-moisture curable, acrylated polyurethane conformal coatingFeatures of GOLOHO-L213 UV rapid cure secondary moisture cureone-component, 100% solid content low visco...view
  • Thermally Conductive Silicone Compound - 9602

    Thermally Conductive Silicone Compound - 9602

    November 30, 2017GOLOHO-9691 is a pasty, high-efficient thermally conductive compound,filled in the room between the electronic components and the heatsinks, such as between modern high-power CPUs and high performance hea...view
  • Two-Part, 1 To 1 Mix Ratio Silicone Potting - 4313-AB

    Two-Part, 1 To 1 Mix Ratio Silicone Potting - 4313-AB

    November 30, 2017GOLOHO-4313(W)-AB is a two part flame retardant additional thermal conductive encapsulant particularly designed for electrical industrial. It will form rubber elastomer non-corrosive to metal at room ...view
  • High Thermally Conductive Silicone Adhesive - 2754

    High Thermally Conductive Silicone Adhesive - 2754

    November 30, 2017GOLOHO-2743 is a flowable RTV silicone high thermally conductive adhesiveFeatures of GOLOHO-2743Convenient to use: one-part, rapid cure at room temperatureNeutral, no corrosion for many metalsExcellen...view